Reading time about 3 minutes
Systec will be presenting its latest products and innovations at the Labvolution trade fair in Hanover. Visitors can look forward to numerous new developments, including the Systec HX, HX 2D, V and D series, which impress with their latest functions, as well as the new Systec Connect Documentation System (DS), which is also available free of charge as an APP.
Systec HX series autoclaves
Particularly impressive are the new Systec HX series autoclaves, which are available in 16 sizes with a chamber volume of 65 - 1580 liters. Despite their high loading capacities, the horizontal floor-standing autoclaves are compact and lightweight and have numerous new functions to increase efficiency. The Systec H-Series 2D pass-through autoclaves are specially designed for gas-tight installation in partition walls and have two doors. The Systec HX series autoclaves can be monitored remotely using the new Systec Connect software and app.
Systec Connect Documentation System & App
With the new Systec Connect Documentation System (DS), all autoclaving processes can be monitored intuitively in real time during operation. This means no more visits to the device and a better overview of current and past processes.
Systec Connect DS is software that collects all available information and presents it in an intuitive and user-friendly way. This saves time and irregularities can be detected immediately, which is perfect for minimizing downtime between autoclaving processes. All important information is displayed, from the type of program running to the current process time. A color-coded overview makes it easy to identify successful (green), messages (yellow) and faulty (red) processes for all compatible devices in the network. This means that errors can be detected and rectified in good time without having to wait for the next inspection.
Systec Connect DS also provides access to information on older autoclaving processes, including useful statistics on maximum and minimum measured values, F0 values and other important details. This enables not only effective monitoring of current processes, but also comparison with completed processes. Systec Connect DS runs on all current systems and can be seamlessly integrated into existing IT systems without the need for costly retrofitting.
All that is required to use Systec Connect DS is an Ethernet or W-LAN connection between the operating network and the autoclaves to be monitored. The data is stored exclusively in the internal network so that the system does not need to access external networks and therefore poses no additional IT risk.
It should also be noted that Systec Connect DS is designed exclusively for monitoring autoclaves. It can monitor the status of the devices, but cannot send any commands to the autoclaves or change existing data. This rules out attempts at manipulation, unintentional process changes and other risks. In order to grant only certain employees access to the system and the history of the autoclaves via Systec Connect DS, the user must be identified. The appropriately configured user account of the respective employee on the autoclave is used for this purpose.
Systec Connect DS provides a comprehensive insight into all current and past autoclaving processes, resulting in even more efficient processes. It is therefore the ideal solution for companies with several autoclaves in order to make the best possible use of working time.
Premiere: New Systec V and Systec D series
Particularly impressive are the new models of the Systec V series, which will be presented for the first time at Labvolution. These top-loading vertical autoclaves (40 - 150 liter floor-standing autoclaves) are particularly compact and are characterized by their large usable chamber height. The new-generation Systec D series will also be presented at the trade fair and offers optimum loading capacity for most standard medium bottles and Erlenmeyer flasks.
Systec Mediaprep and Systec Mediafill
The Systec Mediafill system for the automatic filling of culture media in Petri dishes and test tubes is another focal point of the trade fair presentation. The device is simple and intuitive to operate and enables the precise filling of media and the addition of additives. With a range of options, the Systec Mediafill system can be optimally configured for a wide variety of applications.
Visitors can also find out more about the Systec Mediaprep media preparators for quick and easy preparation and sterilization of microbiological media.
Visit us at our stand and find out more about our innovative products and solutions. Our experts will be happy to answer your questions about our products and solutions.
The Labvolution trade fair will take place from May 9-11, 2023 in Hanover. We look forward to welcoming you to our stand D78 in hall 20 and presenting our latest developments.
