Image Slider

Facts




Horizontal, bench-top autoclaves Systec D-Series

Compact with ideal chamber size in 7 models. Each model has an optimal loading capacity for most standard media bottles and Erlenmeyer flasks.

Contact Information

Contact information

Systec GmbH

Konrad-Adenauer-Straße 15
35440 Linden
Germany

Tel. +49 (0) 6403 67070-0
Fax +49 (0) 6403 67070-222

Additional Menu

Additional navigation


Content

Operation via Display

Standard operation via display

In all Systec D-Series autoclaves, control is via a membrane keypad with acoustic confirmation of input. The display is large and easy to read. Everything is logically positioned, ergonomic and easy to operate. Menu operation is in text form, selectable in German, English, French, Spanish and Italian – other languages optional.

All control functions are carried out by a specially developed microprocessor. Along with steam pressure, temperature and sterilization time, it also controls all options such as rapid cooling, pre- and post-vacuum and drying.

Available programs*

DX
1-3
Solids

4-5
Waste bags

6
Liquid waste with regulated steam exhaust for cooling

7
Liquid waste with self-cooling

8-10
Liquids with regulated steam exhaust for cooling

11
Liquids with self-cooling

12
Cleaning

13
Vacuum test**

14
Bowie-Dick Test**

15-25
Free for individual programming
DE
1-3
Solids

4-5
Waste bags

6
Liquid waste with regulated steam exhaust for cooling

7
Liquid waste with self-cooling

8-10
Liquids with regulated steam exhaust for cooling

11
Liquids with self-cooling

12
Cleaning
DB
1
Solids

2
Waste bags

3
Liquids with regulated steam exhaust for cooling

4
Cleaning

* All programs can be individually parametered.
** Only in combination with vacuum system.

Dual sensors as standard

The regulation of pressure and temperature is via an electronic pressure sensor and a flexible temperature sensor respectively, the latter located in the chamber or in a reference vessel (for liquids).

This Version is standard

Read More...

Close

Safety and convenience

Novel automatic door-opening system

Easy but safe – on closing, the door is automatically locked by a circumferential ring system*. A special lip seal made of heatresistant silicone provides reliable tightness; the more the steam pressure increases, the tighter the seal becomes – without the need for additional compressed air or other media!

The door-locking system is temperature-dependent according to pressure vessel regulation TRB 402 and DIN 58946, Part II. The door remains locked as long as there is excess pressure in the chamber. The door and other parts of the pressure vessel and housing are made of stainless steel. The attractively designed front cover, which also incorporates the control panel, display and parts of the control processing system, is made of heatresistant, insulating plastic. There is thus no risk of the operator coming into contact with hot components.

Door closed
Door closed

Automatic door-opening

The autoclave door functions automatically – either by pressing a button or for model ranges DX and DE automatically at the end of a program. A simple system but most useful in practice. Residual steam is exhausted automatically without intermission. Residual heat is used to dry the items being sterilized during the final short phase in the autoclave. Automatic door-opening is restricted to an angle of approx. 15°; this avoids possible contamination from the outside. Especially when items to be sterilized have to remain in the autoclave for cooling and drying this facilitates the working process. Subsequently, for removing the sterilized items, the door can be completely opened manually.

Exceptions:
In the case of model D-23, a hook mechanism is used instead of a locking ring
system. In model D-45 the door is closed by means of a bolt.
Door open
Door open

Novel automatic door-opening system and automatic door-opening

Read More...

Close

Alternative documentation

By printer

Optional with integrated printer for documentation of program type, batch number, date / time, temperature / pressure progress and sterilization phase.

By PC and documentation software

DX DE

Via RS-232 and RS-485 interface directly connected to a PC or an ethernet network. Special software available for Windows for the documentation of all process data, including informative diagrams. The Systec ADS software processes documented data both graphically and numerically and can be used for parameterization and control of Systec autoclaves.

By SD card

DX DE

Optional comprehensive documentation of up to 10,000 sterilization cycles via an integrated SD card.

Alternatively via Printer, PC, SD-Card, through ComLog or AuditTrail

Read More...

Close